Hi Mart!
Just wanted to send some photos of my ' 29 Ford tudor
sedan I'm building. I chopped it 3" and I will be running a 350 Chevy with
6 Holley 94's. Transmission is a 700r4 so I can cruise and a Halibrand
Champ Quickchange will bring up the rear.
Mike Bruns, Janesville,Wisc. U.S.A.
From Rainer Auersperg of the Hep Demons, Vienna.(Great name). The
above pic from the Waldorf weekender in Germany.
Here's a pic of Rainer's Poncho, and a shot that must be every
hot rodder's nightmare.
Aww Sheeit!
Hi there!
Here are a couple of photos of my 1932 Ford roadster. It has
a steel body and is powered by a 351ci Ford Cleveland V8; top-loader 4
speed box and a 3.5:1 9" diff. It is built old style but with late model
running gear. Its painted Cal suede with pinstiped boot lid, rides on early
wire wheels, breathes through a gennie Cadillac filter and has a traditional
style red interior. I drive it to death! Its got a bad reputation down
here, -which is good!
Best wishes....Rob Warden.-Victoria Australia.
Club: Hot Rod Gang
Hi , there !!! cool cars on ure site !!! my name
is Tom and i am from stuttgart/germany !!! here u see me and my "54 PLYMOUTH
. i set the body on an 1986 chevy-caprice chassis and weld the whole shit
together, then i chopped the roof 6 inches !!! the trunk is 12 inches
longer .the grille is from an "53 DE-SOTO , the lamps are "54 CHEVY . plexy-glass
front-window ,350/350 eng./tranny . bumpers are "54 Plymouth too.
this ugly peace of shit i built up in 4 months . :))
keep it rockin" ...............tom
Mart: This is what I have so far: OG 29 roadster pickup, 8ba
flattie , '51 overdrive, open shaft '36 rear, '40 brakes, bulldog frontend,
hanging pedals, sidesteer, 32 dash, fakey hallock windshield. Will
have a 4 ft pu bed, headers, dual intake and either 16" spokes or steelies
w/blackwalls. Hope to be done by paso 2002
Racin' ya to the finish
Good luck
Travis P
Hi Mart,
Here are a few shots of my '31. It has a V8 60 in it, '37 trans.
I chopped it 3 1/2" and I'd like to channel it about 4" this inter. I've
also been toying with the idea of losing the extra doors and making it
a vicky. The winters are long in upstate NY and I hope that it all can
be done before spring. Great website!!!!
Don Valentine.
Hi Mart, here is one photo for my Roadster project wich was
taken about two months ago. Now it is looking a little diffrent on these
days. In the picture the body is just "mocked up" to its place by using
a wood an so on and the original front axle is still on and no kick up
yet on the back... A brand new 4" dropped axle is on the garage and it
is waiting to get to its place...
Engine is gonna be, not a flathead V8!!!, a flathead fourbanger!!
Notice also stylish 19" original Model-A wire wheels. I´m NOT gonna
use those wheels. I have 16" steelies but not tyres yet... Keep on roddin´`
Ari
Finland
Snapped by Koops at the Northern Swap meet Nov 4th 2001.
29A project.
Mike B ought to recognise this truck, it's the one shipped from
Vern Tardel's.
This neat a-bone belongs to John Kellett.
Thanks Koops.
Mart,
Great car pictures! This is my '51 Ford Victoria.
Can't decide whether to chop it and customize it or sell it and buy one
that is already chopped. Anyway, it is fun to drive 'cuz it is cool, huh?
Keep cruisin' cool.
Michael Patterson.
---oooOOOooo---
Thanks to all the contributers for the pics on this page....Mart.
|
